consider only actual consumption
- 100%
accounting for actual consumption
Heating tariffs include heat losses due to worn pipes. Set up end-to-end accounting and pay after the fact.
2 minutes
to balance
See heat consumption in your personal account. Instantly generate reports
- Up to 70%
reduction of payment for heat
Pay for the heat you consume and cut your heating costs.
Automated heat metering system «ELECFACE»
AOH/HCC
Do not overpay for worn-out heating network infrastructure. Pay after the fact, reduce the costs of tenants.
The Elecface.Cloud personal account
Real Time Smart Meter Data
Collect readings of individual and communal meters via the Internet. 50 or 5,000 meters — all readings are available in 2 clicks.
End-to-end accounting of all thermal units
Track heat consumption on individual metering devices. Check your balance in real time.
Heat meter SPM-M-15 with radio modem "ELECFACE"
In each apartment, on each radiator, electronic heat cost allocators with an external «ELECFACE» radio modem are installed.
Devices are installed at the rate of one heat meter per one heating radiator in each room.
After installation, the heat spreader starts transmitting daily statistics of the temperature of the radiator and the ambient air every hour to the personal account.
Automated heat metering "ELECFACE": what will you get from the implementation
Dispatching of heat meters and heat distributors is another method that is relevant for housing and communal services to reliably collect readings from apartment and general house heat meters. The advantages of ELECFACE technology are in demand for everyone
Unlike water dispatching systems, where there is only one metering point in an apartment, an automated heat metering system in an apartment building is arranged differently, since the number of radiators in apartments is almost always more than two.
Today, heat in apartments is one of the most expensive resources, but at the same time one of the most poorly accounted for. Heat meters are installed in 3-4% of apartments and mainly in new housing stock. For the rest, a situation is typical when the general building heat meters are broken, or they are completely absent: the pipes are slagged, the heat transfer is reduced by 25-30%. A significant part of the heat energy is lost on the way to the apartment building
In the field of accurate heat metering in the housing and communal services industry, there is a big failure and, in the end, all heat energy losses end up in the residents' receipts.